1.with 8 LED Lamp, will be very clearly even at night
2.compatible with DVD automobile navigation
3.170 degree wide angle, find the potential reverse in reality, such as a kids in a blind eye, novice drivers reverse the dilemma, transfer from the car parking area.
4. with CCD core, the video and picture will be more clear
5. waterproof, shockproof and dust proof
6. good quality and longer service time.
*Drill Hole Style Car HD Rear View Camera, gives you a full sight of the back of your car when you are driving
*8 LED Infrared Night Vision ensures the car driving safety when backup or parking at night
*Helps to avoid incidents, accidents abrasion and ensure your safety
*Anti fog glass, CMOS imaging sensor
*Support NTSC/PAL video system
*With the high sensitivity, you can get rid of the poor rear vision
*High definition and up to 170 degrees wide viewing angle
*Use high quality Chip to make vivid and clear images
*Compact design, easy to install and operate
*IP68 waterproof design, shock-proof and anti-jamming functions
*Applicable to variety of vehicles: car, truck, RV, etc
*Can connect to any type of monitor with a composite yellow RCA jack
*Image Sensors: PC1030 1/4 Inch Color CMOS
*Sensor Area: 4.08 x 3.12mm
*Effective Pixels: 648 x 488 Pixels
*LED Quantity: 8 IR LED
*Lens Angle: 170 / 135 degrees
*Image pipeline feature: Auto exposure, AWB, AGC, Auto ficker detection and cancellation
*Video System: PAL/NTSC(Automatic throw-over)
*Minimum Illumination: 0.2Lux(0Lux with IR on)
*Scanning System: 2:1 Interlace
*Resolution : 420TV lines
*Electronic Shutter: 1/60(NTSC) / 1/50(PAL)~1/1000s
*Gamma Coefficient: 0.45
*S/N Ratio: >45.6db
*Dynamic Range: > 63.5db
*Waterproof Class: IP 68
*Operation Temperature: -20℃~ +75℃
*Storage Temperature: -40℃~+85℃
*Video Output: RCA connector, 1.0vp-p, 75Ohm
*Working Power: DC12V
*Video cable length: Approx 6 m/ 236.2 inch
*Power supply cable length: Approx 1.2m/ 47.2 inch
*Drill Hole Diameter: Approx 18.5mm/0.73 inch
*Camera Dimension: Approx 25*21*18.5mm/0.98*0.83*0.73 inch
How to install ?
1.Use the hole driller to mount the camera at the back of the car (on the license plate back window or other suitable place)
2.Connect the power of the camera to your reverse lights - red wire to positive and black wire to negative.
3.Connect the video cable of the camera to the extension cord.
4.Connect the extension cable to the car monitor.
5.You will see the images when your car is in reverse shift.
Does NOT come with Monitor..
1*8 LED round back up camera
1* hole saw
1* colored box package